Owen Development GBT6179 Turbocharger – AET Turbos
COVID19 update - our workshop remains open to fulfil existing urgent orders only (travel & infrastructure). Find out more.
Menu
Cart 0
Owen Development GBT6179 Turbocharger

Owen Development GBT6179 Turbocharger

Owen Developments

  • £1,439.66


Please ensure this is the correct turbo for your vehicle, if you are unsure in any way please call our support team on 01924 894171.

Product Description

The 61mm frame GBT is suited for 1.8-3.0 litre engines providing outputs between 300-670hp.With cross over in power figures from the 54mm to the 61mm, the operating compressor efficiency can always be high with the correct unit selection.

Specification

Model Compressor Wheel Dimensions  Turbine Wheel Dimensions
Inducer Exducer Trim Exducer Inducer Trim
GBT6179 57.2 79 52.4 55 61 81.1

*(mm)

Compressor Cover Turbine Housing Power Range
Options Options (HP)
Ma5, Ma7 NT5.0, NT5.1, NT5.2 460-630

 

Compressor Cover Options
Model Inlet Size Outlet Size A/R
Ma5 4" 2" 0.61
Ma7 4" 2.5" 0.69

Turbine Housing Options
Model Inlet Outlet A/R
NT5.0 V-Band 3" V-Band 0.82
NT5.1 T3 3" V-Band 0.82
NT5.2 T3 3" V-Band 0.62

Options.

Ceramic Coating.

The option to now have a ceramic coating on your Owen Developments turbo is one that can increase the thermal efficiency of the turbo meaning an increase to engine performance and reliability. The ceramic coating courtesy of Zircotec applies a 3mm layer around the housing which reduces heat loss and allows protection of vulnerable components near the exhaust.

Studies found that it can reduce exhaust surface temperatures by up to 33% and allowing possible reductions in exhaust temperature of >50 degrees Celsius.

As coating is around £200-250 but with this now standard on Owens turbos you can upgrade for around £100. 

Anodising.

The GBT units come with an anodised compressor wheel and compressor backplate as standard. In addition to giving the turbos excellent aesthetic appearance the anodising creates a protective layer on the aluminium that helps prevent oxidisation and increases resistance to scratching and wear.

Water-Cooled or Air-Cooled Bearing Housings.

Water cooling is commonly run through OEM and motorsport turbochargers, to help prevent against heat soak to the bearing system. However, where plumbing restrictions or packaging and weight saving is key there is an option to use an air only cooled bearing housing. GBT turbos specially designed air and oil cooled bearing housing has radial air fins, giving a large surface area. Heat soak is dissipated substantially more than just basic oil-cooling alone. Drawing heat away from the oil, bearing system and rotational assembly parts reduces oil breakdown rates and improves component longevity.

Ported Compressor covers.

Generally Ported shroud compressor covers with anti-surge ports is favoured, especially with larger wheel sizes, as it widens the safe operating zone within the compressor map, increases top end flow and protects against low down surge. The advantage with a non-ported compressor cover is that it is significantly quieter.

Warranty

All our turbo units except competition units carry a 24-month warranty, or 24,000 miles for petrol, 50,000 miles diesel whichever comes first, this is from the date of invoice, provided that they are fitted in accordance with the manufacturers fitting guidelines and are not fitted to a worn/faulty/contaminated engine. AET Turbos recommend fitting a new oil feed pipe and the use of high quality synthetic/semi-synthetic oil, which should be changed according to manufacturer’s recommendations or every 6,000 miles if no guidance is available. Please see our terms and conditions for further information.

We send fitting instructions with every turbo dispatch.

Minimum-Flow Point Set Correctly Every Time.

All AET Variable Geometry (sometimes called VNT or Variable Vain) Turbo are flow tested to ensure the critical minimum-flow stop is at the correct setting before your turbo leaves our workshop. This will ensure your turbocharger will give your vehicle optimum performance and В fuel efficiency from the moment it is fitted.

The Highest Standard in Turbo Quality

Quality has been at the forefront of every decision we have ever made, a fact that was recognised in 1990 when we became the first British turbo re manufacturing company to be awarded the ISO 9001 accreditation. Today, it still remains the case, and that is why we carry out work for the majority of the OE manufacturers. We were responsible for the design of many of their quality system processes. From the design of our rigorous testing processes, to the choice of our brand partners, we are committed to delivering the very highest standard of quality of turbos, spares and advice to our customers.

Your ISO Guarantee.

ISO 9001 is an international Standard that acts as your guarantee that you will receive the same level of quality assurance and service from AET as you would do if you were dealing directly with the manufacturer.


Ask a Question

Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question